view cart
Items: 0 Total: £0.00
currency

Best Sellers

  1. Intellect 1S 160mAh 25C Li-Po(2pcs)
  2. EnErG-Pro 25C LIPO 2700 11.1v with 5C Charge Rate
  3. 4.8v 2000mAh Eneloop Rx Pk Flat
  4. UHU POR GLUE (FOAM FRIENDLY) 40ml
  5. WOT 4 Mk2 Foam-E ARTF

VOUCHERS

 Available Instore

SOCIAL NETWORKING

Join Our Facebook Group  Follow us on Twitter  Read Our Blog  You Tube Video

Payments accepted by

Show Dates

ST Models MX2 EP

Specification

  • Wingspan: 1210mm (47.6in)
  • Length: 1106mm (43.5in)
  • Weight: 960g (33.8oz) Typical
  • Wing Area: 27.3dm2 (423.2 sq.in)
  • Wing Loading: 35.16 g/dm2 (11.5 oz.sq.in)
  • LiPo: 3S 2100mAh 20C Recommended

Want a sports aerobatic model that is economic to buy, economic to operate and stunning to fly? You've just found it!

The ST Models MX-2 is based on the full size, aerobatic aircraft of the same name and then modified for model flying characteristics.

Supplied complete with powerful 920Kv brushless motor, 12 x 5 propeller, a 30A brushless ESC, four powerful new 9g servos and with them all pre-installed. All that is needed is 30 minutes of final assembly and applying the stunning colour decals.

Setups are provided for both sports and 3D flying (even mixes). For serious 3D pilots, the movements make maneouvres like static loops, rolls and the 'waterfall' and 'parachute' quite within your reach.

To provide that 3D control power with precision has been achieved with a totally new servo amplifier to give high resolution and holding power combined with strong torque. The control pushrods are kept short by placing each servo close to the surface it is operating.

Using a 3S 2100-2500mAh Li-Po, there is enough power to hover vertically with ease and then punch out straight up! The choice of a 12 x 5 propeller limits the 'torque' turn effect and eases current consumption by matching the load and motor power/Kv rating effectively. Torque rolss are possible in both directions. Access to the battery is via a clip-in underside hatch, simple!

Like all ST models, the airframe is moulded accurately in 'ding' resistant EPO foam. The wings are removable by slackening just two screws and sliding them off the tubular carbon spar tube. Great for compact transportation. Access to the radio compartment requires pulling off the clip-on canopy moulding.

The tough, aluminium undercarrige soaks up those landings on our club patches so well, but the model is hardly moving forward anyway!

As a model to hone your aerobatic skills or just cruise around on a Sunday afternoon, the ST Models MX-2 is hard to beat.

And it looks 'cool' too!



Price: £119.99
Sorry, this item is out of stock
ST Models MX2 EP

Customer Reviews
Write an online review and share your thoughts with other shoppers!


Model Shops Near ,Ashbourne ,Crewe ,Congleton ,Macclesfield ,Winsford ,HolmesChapel ,Leek ,Buxton ,Sandbach ,Nantwich ,Winsford ,Northwich ,Market Drayton ,Eccleshall ,Stone ,Stafford ,Cannock ,Uttoxeter ,Cheadle ,Biddulph ,Alsager, Model Shops In , Staffordshire ,Cheshire ,Shropshire ,West Midlands

ecommerce software by ekmPowershop